15
14
FIRST TIME USING
Remove all packing materials from the kettle.
Before connecting of the kettle check, that voltage indicated on
the rating label corresponds the mains voltage in your home.
Fill the kettle with cool water up to the “MAX” mark and boil it. After
boiled water, switch off and empty the kettle. Then the appliance is
ready for use.
1
2
3
After filling your kettle with water, place the kettle on the base
unit.
Connect plug to power supply and pull down the On/ Off switch.
The appliance will begin to operate and the indicator light will
come on.
USING THE APPLIANCE
Open the lid by pressing on the handle release button.
Place the filter between the two grooves near the spout at the
front of the kettle.
Ensure that the filter is pressed down to the bottom of the grooves
and fits correctly then close the lid.
NOTE:
Never leave the filter loose in the kettle. Never remove the filter
while the kettle contains hot water.
Remove the kettle from the base unit.
You can fill the kettle with water by opening the lid, by pressing on
the handle release button.
Not recommend to fill water with less than level “MIN”, kettle is dry
while operating.
Do not fill water with more than 1.5 liters (up to “MAX” mark).
PREPARE FOR USING
FILTER PLAGGING
FILLING
SWITCH ON
1
1
1
2
3
2
3
4
2
3
When the water boils, the kettle will switch off automatically and
the indicator light will go off.
The kettle can be switched on again after cooling down about 15-20
seconds, while the kettle has been switched off automatically.
NOTE:
This appliance has a safety system, which automatically switches
off the heater element if the appliance is inadvertently switched
when empty, or if it boils dry. In this case, let the appliance cool
down completely, before filling with water again.
SWITCH OFF
SWITCH ON AGAIN
