30
31
ENGLISH
ENGLISH
If it is still not working after the inspection by yourseft, please immediately
contact our service points, do not apart the unit by yourseft or our company is
out of responsibility.
DO NOT TRY TO ADJUST OR REPAIR THIS APPLIANCE BY YOURSELF.
This may be caused by
the construction of
your cookware. (layers
of different metals
vibrating differently).
Some pans make the
crackling or clicking
noises
This is normal for cook-
ware and does not
indicate a fault.
Rough-edged cook-
ware. Unsuitable,
abrasive scourer or
cleaning products
being used.
The glas is being
sratched.
Use the cookware with
flat and smooth base.
Heating with higher
power and dry the
food for a long time.
The glass is broken.
Do not dry the food for a
long time.
Supply voltage is
above or below the
rated voltage.
Display shows E1 or E2
Inspect whether power
supply is normal. Power
on after the power supply
is normal.
High temperature of
ceramic plate sensor.
(cooking zone #1 or
#2)
Display shows E3 or E4
High temperature of
IGBT (cooking zone #1
or #2)
Display shows E5 or E6
Wait for the temperature
of ceramic plate return to
normal.
Touch “ON/OFF” icon to
restart.
Wait for the temperature
of IGBT return to normal.
Touch “ON/OFF” icon to
restart.
Check whether the fan
runs smoothly, if not,
replace the fan.
INSTALLTION
Under any circumstances, make sure this appliance is well ventilated and the air
inlet and outlet are not blocked.
The safety distance between the hotplate and the cupboard above the hotplate
(such as range hood, shelves,..) should be at least 76cm
L(mm)
W(mm)
H(mm)
D(mm)
A(mm)
B(mm)
X(mm)
F(mm)
590
520
60
56
560+4
+1
490+4
+1
50 mini
3 mini
A
X
X
X
B
L
H
D
W
X
Mini.3mm
F
Cut out the work surface according to the sizes show in the drawing.
For the purpose of installation and use, a minium of 5cm space shall be
preserved around the hole. Please select the heat-resistant and insulated
work surface material to avoid the electrical shock and larger defomation
caused by the heat radiation from the hot plate. The thickness of the work
surface is at least 30mm.
The safety distance between the sides of the hob and the inner surfaces of the
worktop shout be at least 3mm and maximum 1cm.
A
B
E
C
D
