Note:
- Make sure the bottom of the pan and the surface of cooking zone are clean and dry.
- If you do not choose a heating setting within 1 minute, the appliance will
switch of automatically. You will need to start again at step 1.
- You can modify the heating setting at any time during cooking.
- If the display flashes alternately with the heat setting, this mean that:
-> You have not placed a pan on the correct cooking zone
-> The pan you are using is not suitable for induction cooker
-> The pan is too small or not properly centered on the cooking zone.
- The display will automatically turn off after 2 minutes if no suitable pan is
placed on it.
INSTRUCTION FOR USE
Attention before using:
Only use cookware with a base suitable for induction cooker (please refer as
the page 26)
Place the pan with food on the center of cooking zone.
Note:
Clean the water, oil or other dirt on the pan before placing it on the appliance.
Please do not place an empty pot on the appliance to avoid any demage or danger.
Start cooking:
1
2
Touch the ON/OFF control for 3 seconds. After
power on, the buzzer beep once, all display
show “-” or “--”, indicating that the appliance
has entered the state of standby mode.
Place a suitable pan on the cooking zone
which you use.
Touch the heating zone selection control to
choose the cooking zone, an indicator next
to the key will flash.
Select a heat setting by touching the slider
control.
- Slide from left to right to up the power.
- Slide from right to left to down the power.
power down
power up
Note:
- H” will be showed which cooking zone is too hot to touch. It will disappear
when the surface has cooled down to safe temperature.
Booster function:
This is a special function of this appliance that enhances the power to max
level by only one operation.
Finish cooking:
3
4
Touch the heating zone selection
control that you wish to switch off.
Turn the cooking zone off by touch-
ing the slider to “0”, the display shows
“0”.
Turn the whole cooktop off by touch-
ing the ON/OFF control.
Touch the heating zone selection
control.
Touch the Booster icon
B
, the cooking
zone indicator show “b” and the power
reach Max.
6
6
H
B
ENGLISH
ENGLISH
20
21
