Bluestone HOB-8739, User Manual

Page: 11 / 13

21 20
ENGLISH ENGLISH
Cleaning of the filters
- Remove the filter according to below picture.
- The stainless steel filters can be cleaned by hand in warm soapy water. Soak in
warm water and some washing up liquid. For subborn grease stains use a soft
nylon brush to help remove these stains.
- If the stainless steel filter is cleaned by dishwasher, place it inside. Select the most
powerful washing program and highest temperature, maximum is 60
o
C.
- Do not use abraisive product to clean the stainless steel filters.
- After cleaning, ensure that the filters are completely dry before refitting.
Replace the charcoal filters:
- This filter cannot be cleaned or re-used and as a general rule, the activated
charcoal filter should be changed once every three months.
- Remove the filters according to
below picture.
- The charcoal filters are located at
both end of the motor. Turn the
charcoal filters until they are locked.
- The charcoal filter must be replaced
by the manufacturer, its service
agent or similarly qualified person
in order to avoid a hazard.
CLEANING AND MAINTENANCE
Before cleaning or maintenance is carried out, the appliance should be
disconnected from the main power supply. Ensure this appliance is switched off
at the wall socket and the plug removed.
SPECIFICATION
Voltage 220-240V~50/60Hz
Rated Power 233W
Lighting Power 2x1.5W
Motor Power 230W
Diameter of Air Tube 150mm
Air flow 750m
3
/h
Noise level ≤55dBA
After cooker hood is switched on, all key lights are lightened. The cooker hood is
in working condition now.
Control panel
Turn on/ increase power:
Touch the icon to start , the motor will operate at the default level of 1. Touch icon
once, motor speed increased one setting.
Turn off/ decrease power:
Touch icon once, motor speed decreased one setting.When at the lowest setting,
continue to touch the icon to proceed to shutdown.
Lights indicate the current power:
Turn on/ off LED light:
Touch one time for turing the light on, touch another to turn off.
Delay function:
When motor is on working condition, touch one time to set minutes delay, touch
another time to to turn the delay funtion off.
INSTRUCTION FOR USE