7
Installation
Unpacking
Remove packaging materials
IMPORTANT: Do not remove any permanent instruction labels or the data labels on your
appliance.
z
Remove the appliance from the packaging. Make sure that all protective plastic film and coatings
are thoroughly removed from all inner and outer surfaces.
z
Do not use sharp instruments, rubbing alcohol, flammable fluids, or abrasive cleaners to remove
tape or glue.
NOTE: Before using the appliance for the first time, clean the internal cabinet with soapy
water and sanitizing solution (See cleaning and Maintenance section of manual).
Location Requirements
Make sure the unit is installed on a flat surface and in a stable condition while in use. Keep away at
least 10" from the edge of the surface to reduce the risk of the unit falling .Keeping away from a heat
source is
essential.
NOTE: The appliance is for indoor use only.
