5
INSTALLATION INSTRUCTIONS
Electrical Connection
The installation of this appliance and the connection to the electrical network should be
entrusted only to an electrician who is aware of the local regulations and respects them
scrupulously.
The electrical parts should always be protected after the installation.
The appliance should be connected using a multipolar circuit breaker.
If the appliance is not fitted with an accessible plug, disconnecting methods must be
incorporated in the fixed installation, in accordance with the installation regulations.
The inlet hose must be positioned so that it does not touch any of the hot parts of the
cooktop or oven.
This appliance must only be connected to a network 230 VAC~ 50/60 Hz
.
Always connect the ground wire.
Connecting the Cooktop
Connect the black and white wires to the 2 phases (230 VAC), and the green wire to the
ground.
Make sure that the cables are correctly inserted and tightly screwed
down.
Mains
Connection
Cable Diameter Protection Calibre
230 VAC~ 50/60Hz
2 Phases
3 x 10 AWG
(supplied)
50 A
CAUTION!
CAUTION!
BlueStar® cannot be held responsible for any incident resulting from an incorrect connection, or
which could arise from the use of an appliance which has not been grounded or has been equipped
with a faulty ground connection.