04
Operation
ALWAYS
check the light for any damage before use. Check for damage to the cable, lens or light casing.
If light is damaged do not use as this may cause damage to property or cause injury.
1.
Before using the lamp for the first time the battery must be fully charged.
2.
If you would like to use the light hands free you can secure the light to a metallic surface using
the magnetic base.
3.
Set the light into the desired angle using the 360° adjustable head.
4.
To turn the light on use the button on the front of the light. To adjust the brightness of the light or
to use the light on the top instead of the main light press the button again.
5.
The button will glow green to show that the light is switched on.
6.
To turn the light off press the button until it is no longer green.
Cleaning & Maintenance
Allow the light to cool down fully before cleaning or performing any maintenance.
Clean the light case externally (not the glass/lens) with a moist cloth.
NEVER
use solvents or abrasives to clean the light.
If necessary clean the glass/lens with a soft cloth.
Charging
The Electralight Aluminium 5W Flexible COB Light includes a rechargeable battery. To recharge the
battery follow the instructions below –
1.
Connect the USB wire to the back of the light via the charging port.
2.
Ensure the USB wire is securely connected to the light.
3.
Connect the USB wire to a power supply.
4.
It should take approximately 4-5 hours for the light to fully charge.
5.
When the light is charged carefully disconnect the USB lead from the power supply and also from
the light.
DO NOT
leave the battery without charge for an extended period as this risks damaging the battery.