ENGLISH
7
TO ACCESS REAR I/O PORT
Remove 4 screws holding I/O plate. Use screwdriver edge or sharp knife
to lift plate. Pass Ethernet cable through grommet and hole to connect
cable, before re-attaching I/O plate for proper operation.
FEEDING ORDER OF ETHERNET CABLE INTO I/O PORT CAVITY
PLAYER SETTINGS (SETTINGS/PLAYER/AUDIO)
POE SUPPLY
•
Default setting is for 30-Watt PoE supply. This will correctly set the
volume limits versus available power.
•
If a 60-Watt PoE supply is available, change the setting to 60W to
take advantage of increased available power.
WARNING
· If 60-Watt PoE setting is chosen and 30-Watt PoE supply is used
when volume is set to upper limit, the Switch or injector power
supply will go into self protect and cause a reboot.
CONNECTING ETHERNET CABLE TO BSP500 PLAYER
