Bluesonic BS-F110, User Manual, Page: 8 / 8

8
2. Getting Started
2.1 Inserting the Memory Card
Insert the memory card and push it until it clicks into place.
To rem o ve the memory card
Push to eject the memory card out of the slot.
Note: Do not remove or insert the memory card when the device is turned
on. This may damage the memory card.
2.2 Connecting to Power
Use only the supplied Car Adapter to power up the device and charge the
built-in-battery.
1. Connect the cameras to the corresponding slots on the hub.
2. Connect one end of the Car Adapter to the USB Connector of the device.
3. Plug the other end of the Car Charger to the cigarette lighter socket of
your vehicle.
2.3 Installing in Vehicles
Mounting to Windshield
1. Attach the device to the bracket base with sticker. Make sure the device is
securely locked in place.
9
2. Position the sticker on the windshield with the sticky surface and press for
a moment. Make sure the base is securely attached to the place.
3. Attach the second camera on the rear window, using the sticker.
4. Hold the camera firmly on the windshield and press for a moment until the
sticker sticks to the glass. Make sure the base is securely attached to the
place.
2.4 Powering the Device On/Off
Auto Power On/Off
Once the vehicle engine is started, the device automatically turns on if the
switch is in ON position on the Controller. If the Automatic Record Function is
enabled, the recording will automatically start right after the device turns on.
Once the vehicle engine shuts down, the device automatically saves the
recording and turns off the power.
Manual Power On/Off
To manually turn on the power, chose the camera with the help of Channel
Switch and long press the POWER Button.
To turn off, press and hold the POWER Button for at least 2 seconds.
3. Using the Car Recorder
3.1 Recording Videos
Recording videos while driving
When the vehicle engine starts up the device automatically turns on and
starts recording. Recording will automatically stop when the engine is
switched off. Or, press the OK Button to stop recording manually.
Note: On some cars, the recording will continue when the engine is switch
off. If this happens, do one of the following:
1. Manually turn off the cigarette lighter.
2. Remove the car adapter from the cigarette lighter.