BlueSky Designs Mount'n Mover DP-T5 Attachment Manual Download Page 2

Page: 2 / 4

Attaching the Quick Release Plate (QRP) to the Tilt Plate

Tobii I-13 fully attached and locked in place

DP-T5

page 2 of 4

First connect the notches on bottom of the

QRP to the protruding pins at the bottom of
the Tilt Plate.

Tilt

Plate

Tilt

Plate

Lock down the black Tilt Handle.

Tilt Handle

Lock

Down

Swing RED LOCK LEVER into lock position.

This locks down the Tilt Handle.

Push RED TAB and lift device up

Tobii I-13 detached from Mount’n Mover

Remove Tobii I-13 or I-16 from Mount’n Mover

C K

Notches

You can also remove

the device at the Quick

Release Plate (QRP)

QRP

Attach QRP to Tilt Plate

Lock down Tilt Handle

Lock Red Lever

Tobii locked in place

Summary of Contents for Mount'n Mover DP-T5

Page 1: ...TWO 2 screws Go through the QRP the DP 1x2 and into the lower two holes on the QCR Counter sunk holes two screws 8 32 x 2 through top two holes on the QRP QRP QRP QCR QCR DP 1x2 Slide the DP T5 onto t...

Page 2: ...te Tilt Plate Lock down the black Tilt Handle Tilt Han dle Lock Down Swing RED LOCK LEVER into lock position This locks down the Tilt Handle Push RED TAB and lift device up Tobii I 13 detached from Mo...

Page 3: ...is on the left Two Counter sunk holes Red Flag Attach DP EXT to DP 1x2 and QCR 3 Place DP EXT over the DP 1x2 and use the four screws to attach all three parts together Note the countersunk holes on...

Page 4: ...s needed 1 Parts needed 1 Turn Rotator 2 Locate attachment holes Attach DP UR to DP T5 3 Two screws through DP UR Attach DP EXT to DP UR Attach the QRP to the threaded inserts on the DP EXT with four...