7
If required, UV-c LED Strip can be cut to a desired
length. Cuts can only be made at the terminal point
seen after each UVC LED labelled ‘LED 3’, peel back
the adhesive strip and fix the UV-c LED strip into place.
Lay the UV-c LED Strip on the top of the evaporating coil, making sure the UV-c LED’s are facing in
towards the unit. UV-c LED’s must not radiate out or point out in the direction of the room.
Connect the UV-c LED strip and add date of
installation to the tag. Note: it is important
for you or any other Engineers to be able to
identify the age of the UV-c LED!
Route the cables from the LED Driver (Output)
through the AC unit making sure they are free
from any moving parts and will not obstruct
the casing being re-fitted. The cable should
be routed to sit at the top of the evaporator
coil close to the ‘air in’ side.
STEP 5
STEP 6
STEP 7
STEP 8