BLUEREV CANADIAN, User Manual, Page: 9 / 16

9
U S E R M A N U A L
Pedals
(Required tools: 15mm wrench, recommended torque 35-40 N.m.)
The right and left pedals are marked with an "R" or "L" on the end of the thread. The right pedal axle has a smooth
surface whereas the left pedal axle has grooves.
The pedal and crank threads must line up easily. Ensure that you tighten the pedals with your hand first. It should be easy
for the first few turns. Do not force if tightening is hard. Stop immediately as the pedal thread is not aligned and continuing
to do so will damage the thread of the crank.
1. Apply a small amount of grease onto the pedal thread axle.
2. Insert the right pedal into the right crank. Carefully thread the pedal clockwise onto the crank by hand
slowly and then tighten.
3. Insert the left pedal into the left crank. Carefully thread the pedal counter-clockwise onto the crank by
hand slowly and then tighten.
Warning: Inserting the pedal into the wrong angle or not tightening it firmly will tear and strip the crank thread and will
cause the pedal to detach.
RemovingThe Battery
The battery keys come attached to the handlebar. Insert the key into the key port, turn clockwise, and pull the battery or battery lever.
Warning: Failure to carry out proper assembly, operation, and maintenance can result in serious injury.
ASSEMBLY