BATTERY PODS & POWER
20s
“OFF”
USB PORT
USB
Connector
USB Cover &
Blanking-Plug
USB Connector
:
To Turn Power ON
To Turn Power OFF
Charging
Batteries
Connecting Batteries
Not Connected or Initialising
Yellow
Fast Charge
Orange
Top-off Charge
Green with Yellow Pulse
Complete (Trickle Charge)
Green
Error (Charging Stopped)
(turn off and leave Battery Pod
to cool for one hour minimum)
Orange and Green Flashing
approx 4h
2
1
Charge Status Indicators
PRESS
BEFORE
USE
Press Pressure Relief Valve firmly
before use to check it is sealed.
Insert Battery Pod
fully into the chassis.
Ensure connectors
align and mate fully.
Battery groove
clicks into place
to secure.
Power:
DiveLog:
Target 2
8.4m
Depth:
374m
Distance:
217°
Heading:
32.7m
Altitude:
Selected Marker:
Power
73%
Charge:
Estimated Life:
04:18
Voltage:
14.5V
Power Drain:
26.1W
Sonar System:
ON
Power Mode:
LOW POWER
Vision System:
OFF
OFF
POWER
SONAR
MODE
HOME
VISION
System Status:
FLOAT
DVL
SONAR
CAMERA
LIGHT
CANCEL
POWER OFF
Turn Power Off
Are you sure you want to turn the power off?
This will stop any logging any may loose your
position until a new fix is obtained.
Missions
Markers
Start Dive
Dive Logs
Sonar
Navigation
Diver
Vision
23/04/2016
15:45:01
Power
artemis
pro
Tools
www.blueprintsubsea.com
v2.0.1234
Refer to manual for full Battery
safety and usage instructions
Batteries will
self-discharge
in storage.
Charge Battery Pod
before use.
Accessing The USB Port
Connecting The USB Cable
Replacing The Chassis Cover & Blanking Plug
Connecting the Satellite (GNSS) Float
Pull rear chassis cover outwards to access the USB connector.
USB Adapter Lead
USB Cable
Use the USB Adapter Lead and USB Cable
to connect ArtemisPRO to a PC.
PC with NavPoint software
Navigate to “
\\ARTEMISPRO
”
You will need to install RNDIS drivers when
connecting a PC to ArtemisPRO for the first time.
See the manual for further details.
USB
Connector
Ensure the float cable is secured
to the diver or chassis and no
strain is placed on the connector.
Always replace the Chassis Cover and
USB Blanking Plug after use!
This stops the connector pins from getting
wet, preventing damage and corrosion.
