CONSOLE FEATURES
GETTING STARTED
Before using the ArtemisPRO system for the first time,
please read the full User Manual as this contains important
safety and operational information.
l
Do not rely on this product or its sensors as a primary
means of life-support during or after a dive. Artemis is
designed as a survey tool, and not as an alternative or
replacement for dive-computers or similar apparatus.
l
Do not submerge the console, unless the USB Blanking Plug
is fitted and the battery pressure valve has been checked.
l
Do not use this product if any of the cabling, or housings of
its component parts appear to be damaged or
compromised for the ingress of water (where required to be
watertight).
When you have finished using your ArtemisPRO system, you
should:
l
Remove any weed, or other detritus, that may have been
collected during its operation.
l
Wash the system in fresh water, if it has been used in salt-
water, to prevent corrosion and damage to rubber
mouldings.
l
Store in a well ventilated location after use, to allow any
moisture on system components to evaporate before
closing the case.
For long-term storage (more than a couple of weeks):
l
Remove the Battery Pod
l
Charge batteries and store in a fully charged state
l
Every 6-12 months inspect system parts and recharge
batteries.
«
if specified at the time of ordering
‰
ˆ
‡
‡
Transit and storage case
ArtemisPRO
Battery Pods (x2)
Battery Charger & Mains Lead
Satellite Receiver Float
USB Adapter & USB Lead
User Manuals, Software Media
(CD or USB stick) and
ENC S-57/S-63 Dongle
«
Check that your ArtemisPRO system contains
the following items...
ˆ
‰
Chassis Rear Cover
USB Blanking Plug
Settings
Compass
Calibration
Help
Scuttle
Snapshots
Satellites
Diagnostics
23/04/2016
15:45:01
Power
artemis
pro
Home
www.blueprintsubsea.com
v2.0.1234
Missions
Markers
Start Dive
Dive Logs
Sonar
Navigation
Diver
Vision
23/04/2016
15:45:01
Power
artemis
pro
Tools
www.blueprintsubsea.com
v2.0.1234
Power:
DiveLog:
Target 2
8.4m
Depth:
374m
Distance:
217°
Heading:
32.7m
Altitude:
Selected Marker:
Power
73%
Charge:
Estimated Life:
04:18
Voltage:
14.5V
Power Drain:
26.1W
Sonar System:
ON
Power Mode:
LOW POWER
Vision System:
OFF
OFF
POWER
SONAR
MODE
HOME
VISION
System Status:
FLOAT
DVL
SONAR
CAMERA
LIGHT
Power Management Display
Home Screen
Tools Screen
Function Buttons
(F1 to F8 - function depends on display)
Home Button
(Home Screen / Tools Screen)
Power Button
(Power On / Power Management Display)
Button Functions
Combined Button Functions
F1+F2
SNAPSHOT
F3+F4
BRIGHTNESS
Main Information
Displays
Mission & Dive-Log
Management Display
Turn On
Display Navigation
(Press both buttons at the same time)
‡
Chassis
Console
(Display and Keypad)
Battery Pod
Navigation Pod
(DVL, AHRS, GNSS)
Forward-looking
Multibeam Sonar
Dive-Light
«
Video Camera
«
‡
ˆ
‰
DVL Transducers
Chassis Cover &
USB Blanking Plug
‰
ˆ
Sensor Status
Indicators
«
if specified at the time of ordering
Maintenance & Storage
Quick Reference
Guide
artemis
pro
