Features
• 24 hour operation
• Up to 8 ON/OFF settings every day of the week
• Cycles from 1 minute to 7 days
• Maximum Load: 1725W/15A/115V
• Rechargeable NiMH battery saves programmed settings in case of power loss
Using the Blueprint Digital Timer
Before Use
Plug unit into outlet and allow internal battery to charge for at least 2 hours before setting time.
Set Current Time and Day
1. Press “CLOCK” and “HOUR” at the same time to set the hour.
2. Press “CLOCK” and “MIN” at the same time to set the minute.
3. Press “CLOCK” and “WEEK” at the same time to set the day of the week.
Program ON/OFF Cycles
1. Press “PROG” to enter the “ON” setting mode. The display will show “1 ON.”
2. Press “HOUR” to cycle through and select the desired hour at which the timer will activate. Repeat with the
“MIN” button.
3. “Mo, Tu, We, Th, Fr, Sa, Su” will display. This will set the timer to operate daily.
4. Press “WEEK” to cycle through and select a single day on which the timer will activate. Continue to press “WEEK”
to cycle through and select one of various combinations of days.
5. Press “PROG” to enter the “OFF” setting mode. The display will show “1 OFF.”
6. Use “HOUR,” “MIN” and “WEEK” to set the hour, minute and day(s) of the week on which the timer will turn off.
7. Repeat steps 1-6 to program up to 7 additional ON/OFF cycles.
8. When in “PROG” mode, press “R” to delete the displayed timer setting. Press “R” again to return to setting mode.
Select Timer Mode
Press “ON/AUTO/OFF” to cycle through timer modes.
• Select “ON” to keep timer constantly on.
• Select “AUTO” to run timer as programmed.
• Select “OFF” to turn timer off.
Random Function
Press “HOUR” and “WEEK” at the same time to show “o” on the right hand side of the display. This will randomly
extend ON and OFF settings by 2 to 32 minutes.
Reset Function
Press the small recessed button below the “R” button to default to factory settings.
rev:92016
Digital Timer, BDT-1
READ AND SAVE THESE INSTRUCTIONS
