BluePoint Fasteners BP-27C, Instruction Manual, Page: 4 / 13

SAFETY PRECAUTION
06
1. Always check the tool first to
ensure that it does not contain a
strip or a fastener.
DAILY FUNCTION TEST
Tool operators and bystanders
must wear ear and eye protection.
Read the manual thoroughly before
operating the tool.
Never keep a hand over fastener
loading end of the tool. A serious
hand injury may occur from
penetration by the piston or a
discharged fastener.
2. Try the tool by depressing the nose
piece, barrel and firing pin spring
completely on a hard surface. You
should hear an audible clicking
sound. Let up on the tool and make
sure the barrel is open to
semi-open position.
SAFE HANDLING OF TOOLS
07
5. Never place your hands or any
other body part on the loading
end of the tool.
It can cause serious
injury by the fastener or piston if
the tool is fired accidently.
7. Never point the tool at yourself or
others.
8. Never carry a loaded tool around
or play with the tool.
9. Never allow untrained persons to
operate the tool.
10. Using or cleaning tools, or
handling loads in poorly ventilated
areas may result in exposure to
lead and other substances known
to cause birth defects and physical
changes. Always ensure adequate
ventilation at all times and wash
thoroughly after exposure.
6. Always unload the tool and store
it along with the loads safely
locked in a toolbox
. Keep the keys
away from children and
unauthorized persons.
1. Always make sure that the tool is
working
properly before use.
Follow the Daily Function Test.
2. Always use certified BLUE POINT
loads from a box indicating the
type of load, power and number.
Never attempt to use unknown
power loads.
3. DO NOT carry loads in pockets
with loose pins or other objects.
Doing so may cause the load to fire.
4. DO NOT load a tool unless you
intend to use it immediately.
Unattended loaded tool in the
workplace
may result in its
accidental discharge by others.
BP-27C IS NOT A STAND-ALONE TOOL.
IT MUST ALWAYS BE USED MOUNTED ON A BLUE POINT POLE.