BLUEKITE USB2.0 Pen Drive – User Guide
8
2.2.3 Unplug
You can remove the device directly after you
finish your job with the device in Windows
XP O.S.
However, in Windows 2000/ME/98SE O.S.,
please follow the safe removal procedure:
You can find a safe removal icon at the
Windows toolbar. Double click the
safe
removal
icon, and the
Unplug or Eject
Hardware
window will be popped up. You
can select the device you want to remove.
Then, click the “Stop” button. After that you
can unplug the device from the USB port of
your computer.
CAUTION: When you want to remove the “USB Flash Disk” device, make
sure the
Flash Memory LED
is not flashing. When the LED flashes quickly,
there are some traffic on going between the O.S. and the “USB Flash Disk”
device. Don’t remove the “USB Flash Disk” at this moment. Otherwise, it
will cause some damages to the data or even the “USB Flash Disk” device
itself.
2.2.4 Use with a computer without the Bluetooth software
-
The read/write operation of the Bluekite USB2.0 Pen Driver is still
enabled if its Bluetooth radio is “switch-off”.
-
You will encounter the
Found New Hardware Wizard
windows after you
plugged the Bluekite USB2.0 Pen Driver
in the computer if its Bluetooth radio
switch is “switch-on”. You can either click
“Cancel” button to ignore the request or
switch off the Bluetooth radio to continue
using the USB2.0 Pen Driver. If you want
to enable its Bluetooth functions for the
Figure 2.2.3.1 – Safe removal icon
Figure 2.2.3.2 – Unplug or Eject Hardware window
Figure 2.2.4.1 - Found New
Hardware Wizard window