Bluegiga Technologies WRAP 1260, User Manual

Page: 12 / 26

U
SER
M
ANUAL
WRAP P
RODUCT
S
ERIES
Whether the Serial Port Profile is enabled or not.
2. Act as the Calling Device [N]
Whether this device should act as the calling device (DevA) or the answering device (DevB).
3. BPS Rate [9600]
The bits-per-second rate of the connection. Possible values are 300, 1200, 2400, 4800, 9600, 19200,
38400, 57600, 115200, 230400 and 460800.
4. Data Bits [8]
The number of data bits in the connection. Possible values are 5, 6, 7 and 8.
5. Parity [0]
The parity bit setting of the connection. Possible values are: 0: no parity, 1: odd parity and 2: even
parity.
6. Stop Bits [1]
The number of stop bits in the connection. Possible values are 1 and 2.
7. Hardware Flow Control (RTS/CTS) [Y]
Whether the hardware flow control is used in the connection or not.
8. Software Flow Control (XON/XOFF) [N]
Whether the software flow control is used in the connection or not.
9. Service Name (shown in SDP) [Serial Port]
The name of this service shown in the Service Discovery. (This setting is visible only when setting 2.
"Act as the Calling device" is disabled.)
10. Bluetooth Address of the Remote Device [00:07:80:80:01:1f]
The Bluetooth address of the device to be contacted. (This setting is visible only when setting 2.
"Act as the Calling device" is enabled.)
11. Server Channel of the Remote Device [10]
The Bluetooth server channel of the device to be contacted. (This setting is visible only when setting
2. "Act as the Calling device" is enabled.)
3.3.4 OBEX S
ETTINGS
1. Enable Object Push Profile [Y]
Whether the Object Push Profile is enabled or not.
2. Service Name (shown in SDP) [OBEX Object Push]
The name of this service shown in the Service Discovery.
3. Enable File Transfer Profile [Y]
Whether the File Transfer Profile is enabled or not.
4. Service Name (shown in SDP) [OBEX File Transfer]
The name of this service shown in the Service Discovery.
3.3.5 O
PTIONAL COMMAND LINE PARAMETERS FOR
B
LUETOOTH
S
ERVER
[]
This setting can be used to override the defaults. For example, "—port 4242" would set the Bluetooth server
control port to 4242 instead of the default 10101. However, you should not give any optional parameters for
the Bluetooth server if you don’t know what you are doing.
12 (26)