37
7.
Remove the PCI slot aperture for the corresponding slot the SD|Greed card
will be inserted into.
For more detailed information on correct slots for your motherboard or
system type, please refer to the Bluefish systems and hardware support
section at;
http://www.bluefish444.com/support/compatibility/hardware/
NOTE
Certain slots on motherboards share the same bus. Motherboards
supporting PCI-X 133 MHz slots usually are on a separate bus and will not be
affected by inserting the SD|Greed card.
For a G5 or Intel/AMD motherboards, you should always have the controller
card and the SD|Greed on a separate bus.
For systems with an onboard SCSI controller such as the HP 8200/9300, the
100 MHz bus is shared with the onboard SCSI, so it is wise to place the
SD|Greed in the PCI - X 133 MHz slot, so as to not affect the performance of
the SCSI or FC controller card.
Quick Slot Guide
System Type
Slot type
Power Mac G5.
100 MHz slot
Dual Xeon/AMD with onboard SCSI.
PCI-X 133 MHz slot
Dual Xeon/AMD with controller card and no onboard SCSI.
100 MHz slot
Dual Xeon/AMD with two controller cards and no onboard
SCSI.
PCI-X 133 MHz slot
Intel/AMD 32 Bit Slot.
Any 32 bit slot
Summary of Contents for SD|Greed
Page 1: ...SD Greed User Manual ...
