Bluefish444 SD Fidelity, User Manual

Page: 32 / 66

32
Typical Connection Workflow 1
The following example is a typical workflow you might use if your source is SDI but you have analog monitoring for video
and audio and two channels of audio are required.
•
SDI video I/O
•
Digital XLR audio I/O 4 Channels of Audio
•
Analog video and audio monitoring
Your source and master is Digital SDI for video and Digital Audio by AES/EBU XLR.
Your monitoring is Analog component and analog audio.
If your deck supports embedded audio you could I/O the audio via the SDI and monitor the 4 channels via XLR or S/P DIF.
Feature application Settings
•
Digital audio routing channels 1 & 2 to Analog left and right
•
Analog Video output set to Component
(DVID 1) SDI ‘A’ OUT Input of Deck
Genlock
(AVID 1) Y/G/CVBS Output
DIG AUDIO IN 3/4
DIG AUDIO OUT1/2
DIG AUDIO OUT 3/4
DIG AUDIO IN 1/2
ANG AUDIO OUT LEFT
ANG AUDIO OUT RIGHT
Cable Connection Guide
SDI Monitor
Analog Audio
Monitoring