Create Range Windows User Manual
6
Create|HD
DCC HD/SD 4:2:2 workflows
Create|HD
is targeted at the uncompressed HD/SD digital content creation workflow. It is ideal
for creative artists looking to connect digital VTR‟s, cameras and monitors working in either HD
or SD SDI.
Create|HD
allows for hardware based real-time up, down or cross-conversion during capture or
playback. The same hardware based scaler intuitively accelerates real time effects within
supported NLE and compositing software. Additionally, dual SDI outputs allow for original and
converted signals to be output simultaneously.
Create|3D
File based digital intermediary 4:4:4 & 4:2:2 3D workflows
Create|3D
is targeted at the file based workflow of independent film making. Ingested files are
edited and previewed from within Adobe Creative Suite and Final Cut Studio as part of an offline
workflow.
The offline project can then be used to re-conform color corrected material and mastered to SD,
HD or 2K resolutions in single link, dual link or 3D stereoscopic output modes.
Create|3D
has 3 X 1D LUT‟s on all outputs allowing for calibration of the display device and
log/linea
r conversion. Create|3D‟s DVI/HDMI preview output contains a high quality hardware
based scaler. This converts the selected input or output to the LCD/Plasma‟s native resolution
and frame rate, bypassing the lower quality internal scaler of the LCD/Plasma. This provides for
low cost and flexible monitoring within the workflow as a wide range of TFT, Plasma and
projectors can be used.
Create|3D
incorporates the
Create|HD
feature set and builds upon it by having dual link and 3D
stereoscopic output and a high quality DVI/HDMI preview output.
Create|3D Ultra
For all digital Intermediary dual link 4:4:4 & 3D I/O workflows
Bluefsh444 has built its reputation on RGB workflows and
Create|3D Ultra
brings together our
10 years of expertise in a cost-effective product integrated tightly with Symmetry for windows DI
& 3D acquisition, preview and playback software.
Create|3D Ultra
incorporates the
Create|HD
and
Create|3D
feature sets and builds upon them
by having a dual link and 3D stereoscopic input.
