6
Fig 14
Testing:
Test the light before installation ensuring that you use the correct input voltage and the light is
illuminated correctly. (take care to not look directly at the light as this could cause damage to eyes)
After installation ensures again that the light is illuminated correctly and the lens label is removed.
The Dock Light is fully IP68, care must be taken to ensure that all electrical and tube connection are
water tight.
DL6CC (Colour change) Operation.
1.
When powered up for the first time or from reset the light will turn on in white and scroll
through the colour range and keep scrolling until stopped by any of the steps below.
2.
To pick a particular colour turn the light off and on again quickly and the chosen colour will
be selected.
3.
If you turn off and on again quickly for the second time the light will start to strobe.
Example of
standard fitment
to a plank of
wood before
submersion into
water.
Ensure that the
stage is done in
advance of final
fitment into
water.
Summary of Contents for DL6D
Page 8: ...8...
