BEH003 User Manual
- 7 -
4.1.4 Answering incoming calls
When BEH003 Headset switch to power on mode a call is forwarded from the paired
device to the BEH003, a ring tone will be heard at the earphone. Press TALK button to
answer the call. Green LED will then flashes 4 times for every 3 seconds periodically.
NOTE:
If your BEH003 is paired with NOKIA cellular phone. The phone will control the
BEH003 to auto-accept incoming calls after 2 rings.
4.1.5 Transfer a call
During a phone call, to transfer the call from fixed-line phone to mobile phone, hold Talk
Button for 3 seconds. (Please refer to 2.3)
4.1.6 Rejeck a call
During a ring, to rejeck the call, hold Talk Button for 3 seconds. (Please refer to 2.3)
4.1.7 Earphone Volume Control
Change volume
z
Press Volume Up button to turn the volume up.
z
Press Volume Down button to turn the volume down.
Mute/Un-mute the microphone
z
Press and hold either volume button for at least 2 seconds to mute. The BEH003
Bluetooth Headset Fuction Mode will make a periodic low-tone beep warning that
the microphone is muted.
z
Press either volume button once to un-mute.
4.1.8 Ending a call
To finish a call, short-press TALK button on the phone.
4.1.9 Making a call
To make calls using the BEH003 Bluetooth headset fuction as below,
1. Voice Dialing
Needs to be used since there is no keyboard built on the BEH003. Please check if
your phone supports Voice Dialing and then follow the phone’s user guide to record
voice tags.
