background image

1

.

 

PLACING THE STACKING KIT

2

.

 

ATTACHING THE STRAP (1)

3

.

 

ATTACHING THE STRAP (2)

If the dryer’s legs are all the way in the 
corners, place the dryer onto the middle of 
the stacking kit 

1

.

If not, unscrew all 4 legs and apply the  
4 wide anti-slip components 

6

 onto the 

corners of the stacking kit. Next, place your 
dryer in the middle of the stacking kit.

Roll out the strap 

4

 and make sure the 

lever of the strap tensioner 

5

 is pointing 

outwards.

Pull the strap down through the slot on the 
right side of the stacking kit 

1

.

Tighten the strap 

4

 around the top or side 

of your dryer as follows:

Open the strap tensioner 

5

 and pull the 

strap through the middle slot. Next, pull 
the strap all the way through the strap 
tensioner.

Pull the strap 

4

 and tighten it around your 

washing machine and dryer until it’s fixed 
in place. Do this by pulling the lever of the 
strap tensioner 

5

 up and down.

Finally, place the plastic protective cover 

7

on top of the strap tensioner.

Pull the strap 

4

 underneath the washing 

machine, keeping it straight in the middle.

Next, pull the strap up through the slot on 
the left side of the stacking kit 

1

. Leave the 

strap hanging for now.

Need help?

Call 

010 798 89 99

  

Coolblue.nl/en/customer-
service

Worktop load capacity.

The worktop is only suitable 
for a maximum weight of 10 
kilograms.

Placing it level.

Make sure the washing 
machine is level before 
placing the stacking kit.

CBL1166

4

.

 

PLACING THE DRYER

5

.

 

TENSIONING THE STRAP (1)

6

.

 

TENSIONING THE STRAP (2)

Follow all instructions as described here and 
only use the included tools. Only use the 
worktop for your laundry basket or to fold your 
laundry. If you fail to do so, the warranty will be 
voided and Coolblue won’t be liable. That would 
be a waste of your purchase.

Press the 4 plastic strips 

2

 against every 

corner on the bottom of the stacking kit 

1

then stick the narrow anti-slip components 

3

 on top of them.

Samsung washer? Push them against the 
outer edge. Turn the kit over and place it on 
the middle of the machine.

CHECKLIST

.

You’re 50% there.

Reviews: