1.Take out your Torricol water filter with Hot & Cold water
dispenser from the packaging.
2. Wash the carbon filter for 4-5 minutes to release the color of
carbon if any.
3. Fix the minerals cartridge in the groove of the upper tank
where pipe fitting connection is available . In other 2 grooves, fix
the Carbon Filters. Fix one end of pipe in the bottom of both the
carbon filters and other end at the pipe fitting connections which
are fixed with mineral cartridge fixing groove.
4. Insert the upper tank into lower tank.
5. Pour Municipal water into upper tank upto the water level mark.
6. Close the tank with lid.
7. Wait for two minutes till water comes in the lower tank after
filtration & mineralization.
8. Keep Torricol product in dry & clean place where three plug
electricity power point is available.
9. Insert the power plug into power socket.
10. Before turning on the main power supply, switch off the Hot &
cold water tank power switch. which is in the back of the machine.
11. Before Plugging on the main power suppply, check that water
availability into the Hot & Cold water tank by pushing the both tap
button.
12. First time , Plug the main power switch on only when water is
available in both the tank. If water is available in tank, switch on
the main power supply & Switch on both the button behind the
machine.
13. After 4-5 minutes,enjoy Hot water & after10-15 minutes,
enjoy purified cold water.
Installation Instructions
3
