10
Operation Guide
Function
Operation
Result
Power On
Press and hold the MFB for 5 seconds in
power off mode
l
Blinking fast in Blue for 2 seconds
l
2 short beep tone
Power Off
Press and hold the MFB for 4 seconds in
standby mode
l
LED turn off
l
2 short beep tone
1. In the power off mode press and hold the
MFB for 8 seconds
Blinking in blue and Red alternatively
2. Perform a device discovery from the
phone.
3. Press the YES soft key on the phone to
bond to the headset
It may take several seconds to establish a
connection
Pairing
4. Then enter the passkey “0000”, and then
“OK” to pair the headset with the phone.
The device ID is now stored in the
phone’s memory.
Pairing is successful when the headset
indicator flashes
5
times rapidly
Press the V+(
?
)button repeatedly, to
increase speaker volume.
Volume
adjustment
Press the V-(
?
)button repeatedly , to
decrease speaker volume.
Receive Call
Press the MFB once
Ringing Tone stopped
End call
Press the MFB once
A short beep tone
(0.5sec)
1. Press MFB once
A tone sounds to prompt the user to speak the
name of the person who the wishes to call
Voice dialling
2. Say the voice tag name
The phone finds the entry, pauses two
seconds, then places the call
Re-dialling
Press and hold the V+ or V- button. To
recall the last number dialled
Reject call
1.when listen incoming ring tone in the
headset
2.Press and hold the MFB button for 3
seconds to reject the in coming call
Headset to Phone: The transfer must be
initiated by the phone
Headset turn to the standby mode
Transferring a
Call
Phone to Headset: Press the MFB to pick up
the call
Mute
1.Long press V+ or V- button
2.A periodic tone will be heard to indicate that the microphone is muted
Un-mute
Press V+ or V- button
