13
www.blueantwireless.com
5.1 Pairing to a mobile phone or PDA
This is an example. This procedure may differ depending
on the mobile phone you’re using.
a. Turn the Power switch to ON at the rear of the
Sonic.
b. Put your Sonic into Pairing mode - Press and
Hold the button until the indicator blinks rapidly and
you hear a distinct melody (about 6 seconds). At this
stage, the Sonic is in Pairing mode and is ready to be
found in searches by other Bluetooth devices.
c. Turn Bluetooth ON in your mobile phone or PDA.
(refer to your phones User Guide)
d. Perform a device discovery to Search/Add the
Sonic.
e. When devices are displayed, select the Sonic.
Enter Passkey “
1234
”.
f. Set the Sonic as a trusted/authorised device, if an
option in your phone.
g. Finish and exit. (Refer to your phones User Guide for
any additional steps)
h. To pair up more devices; Repeat steps b - g for each
device you want to pair.
Note: Some devices require you to pair once for High Quality
Audio/A2DP profile and again for Handsfree/Headset profile,
E.G HP 6515. Other phones require pairing only once but will
