manualshive.com logo in svg

Blueant S4, User Manual

Share
Download
Blueant S4 User Manual Download Page 16

16

List of Voice Commands

When you want to do something, just say 

BlueAnt Speak To Me

, wait for the S4 to ask you to 

Say A Command

, 

and then say one of the following commands:

 

> Am I Connected?

 — The S4 will check if your phone is connected, and attempt to connect if it is not.

 

> Call Back

 — Calls back the last incoming call received on the S4.

 

> Check Battery

 — Tells you the battery level on the S4.

 

> Favorites

 — Wait for the S4 to ask you 

Which Favorite?

 then say one of the following:

 

Information

  

Movies

 

 

Navigate 

 

News

 

Sports 

 

Stock Quotes 

Traffi c 

 

Weather

Please Note: 

The availability of 

Favorites

 depends on your location and mobile carrier. Call charges may apply.

 

> Pair Me

 — Puts the S4 into pairing mode. Any connected phone will be disconnected.

 

> Phone Commands

 — Activates your phone’s voice dialing feature (if supported). Depending on your phone 

model, you may need to record voice tags on the phone to use this feature.

Summary of Contents for S4









































Reviews:

No comments

Brands by name

Popular brands

Load more brands