Blueair CabinAir Nordzone, User Manual

Page: 13 / 22

13
© 2020 CabinAir Sweden AB. All rights reserved.
Connect the Nordzone™ System to the fuse box
1. Locate the fuse box. The location differs depending on vehicle model.
IMPORTANT! The location of fuse box and filter compartment may differ depending
on vehicle model. Consult the service manual of the car if necessary.
2. Remove the cover(s) of the fuse box.
3. Select a fuse location that is only supplying power when the ignition is turned on. Consult
the service manual of the car if necessary. Remove the original fuse, if any.
4. If the selected fuse location already had a fuse, insert it in the empty slot of the fuse tap
connector. If not, use the fuse included in the product box and insert it in the empty slot of
the fuse tap connector.
5. Insert the fuse tap connector in the selected fuse location.
IMPORTANT! To avoid the risk of draining the battery, the fuse tap should connect
to a fuse that does not supply power when the ignition is turned off.
6. Connect the ground connector to the ground screw. Use a screwdriver.
7. Connect the fuse tap cable to the red cable in the main power cord.
8. Remove the housings between the filter compartment and the fuse box, and route the
main power cord between them.
9. Connect the main power cord to the Nordzone System in the filter compartment. Check
that power is supplied to the product when the ignition is turned on, and that power is
cut when the ignition is turned off. The installation is successful if the LED of the product
indicates green. If it indicates red or does not light up, see section
Troubleshooting .
10. Remount the housings and cover(s), if any, and make sure that the main power cord is
routed neatly.