13
x 1
When the unit is turned
on, the start up
sequence begins and
the fan is activated at
the same speed as the
last used setting.
3. Turn on
3b.
3a.
To turn the unit
on
press once.
4. Adjusting the fan speed
By pressing once, the sequence goes around in a
loop from Low speed to Medium Speed to High
Speed to Clean Cycle mode to Low speed etc.
Note:
The unit must be
connected to the
power supply port
and powered up (i.e.
the car´s ignition is
on.)
1
2
3
4
LED behaviour for each fan speed:
Low speed (1)
=
1 white LED blinks 3 times
Medium speed (2)
=
2 white LEDs blink 3 times
High speed (3)
=
3 white LEDs blink 3 times
Clean Cycle mode (4)
=
6 white LEDs blink 3 times
