Certifications
Blueair Inc.
17 N. State, Suite 1830
,
Chicago, IL 60602
Tel:
(888) 258-3247
, Fax:
(312) 727-1153
This product earned the ENERGY STAR
by meeting the strict energy efficiency
guidelines set by the U.S. EPA. The U.S.
EPA does not endorse any manufacturer
claims of healthier indoor air from the use
of this product.
Blueair AB
Danderydsgatan 11, SE-114 26 Stockholm, Sweden
Tel: +46-8-679 45 00, Fax: +46-8-679 45 45
[email protected]
How to use the digital display and remote control
• POWER ON/OFF. Press the green POWER key to turn the unit on and
off. The unit automatically runs on the highest speed for five minutes
after it is turned on to provide fast initial cleaning and then switches to
Auto Mode.
• SPEED. Press the SPEED key to regulate operating speed manually.
– Use Speed 1 for nighttime use.
– Use Speed 2 for daytime use.
– Use Speed 3 for fast initial cleaning or for larger rooms.
– Use Auto Mode to let the electronic gas and particle sensors auto-
matically adjust the operating speed according to the level of parti-
cles and gaseous compounds in the air.
• PRESET. When the unit is turned off, use the PRESET key on the re-
mote control to set ON TIME, OFF TIME and SPEED.
– ON TIME. Press the PRESET key once. Set the ON TIME by using the
plus (+) and minus (–) keys to add or subtract time in intervals of 30
minutes. The display will indicate the amount of time (for instance, 1
for one hour) and count down to zero, when the unit will turn itself
on.
– OFF TIME. Press the PRESET key again. Set the OFF TIME using the
plus (+) and minus (–) keys to add or subtract time in intervals of 30
minutes. The display will indicate the amount of time (for instance, 4
for four hours) until the unit will turn itself off. If ON TIME is set at 1
and OFF TIME is set at 4, the unit will turn on after 1 hour and turn off
after 4 hours of operation.
– SPEED. Press the PRESET key a third time. The operating speed is
shown on the digital display. Choose between the lowest setting (1)
and the highest (3 or 4, depending on the unit). Or choose Auto
Mode to let the unit regulate the operating speed based on the level
of particles and gaseous contaminants in the air.
• TIMER. The TIMER key has two functions: (1) to turn the unit off when
the unit is operating and (2) to keep track of the number of days re-
maining until filter replacement according to Blueair recommenda-
tions.
– OFF TIME. When the unit is turned on, use the TIMER key to set the
time when the unit will turn off in intervals of 1, 2, 4 or 8 hours. Press
the plus (+) and minus (–) keys to add or subtract time in intervals of
30 minutes. The digital display shows the time remaining until the unit
turns itself off.
To deactivate the OFF TIME function, simply press the timer button
on the unit several times until the display indicates the number of
days left until the recommended filter replacement (a number be-
tween 188 and 0).
– FILTER TIMER. When the TIMER key is not used to set the OFF TIME,
it displays the number of days – from 188 to 0 – remaining until the
recommended filter change. However, whenever the TIMER function
is activated, the amount of time remaining before the unit turns itself
off is displayed rather than the number of days to filter change.
• FILTER REPLACEMENT INDICATOR. When the REPLACE FILTER light
shines red, it’s time to change your Blueair filters. To keep your air puri-
fier in top operating condition, Blueair recommends filter replacement
every six months. To reset the REPLACE FILTER light, simply press and
hold the timer button on the unit (not on the remote control) for ap-
proximately 5 seconds.
• ELECTRONIC PARTICLE SENSOR. When particle level is low, the dig-
ital display shows a happy face; when particle level is high, a sad face
is displayed, indicating the need to increase the operating speed or
switch to Auto Mode.
• ELECTRONIC GAS SENSOR. When the level of gaseous contaminants
is low, a happy face appears on the digital display. When level is high,
a sad face is displayed, indicating the need to increase the operating
speed or switch to Auto Mode.
• REMOTE CONTROL. Enjoy the convenience of managing all these
functions using the remote control from distances of up to 6 meters or
20 feet away.
Specifications
Dimensions
660 x 500 x 340 mm
(26H x 20W x 13D inches)
Weight
16 kilograms (35 pounds)
Room size
65 m
2
(698 square feet)
CADR*
Smoke: 450 (765 m
3
/h)
Dust: 400 (680 m
3
/h)
Pollen: 450 (765 m
3
/h)
Airflow rate
150–770 m
3
/h
(90–455 cfm)*
Power usage
35 to 120 watts
Noise level
32 to 66 dB(A)
Filter service life
6 months
Warranty
1 year with option to extend warranty
*Clean Air Delivery Rate, see www.cadr.org
www.sylvane.com 1-800-934-9194
