SETTING MICROPHONE LEVEL
Start with the Microphone Level knob rotated completely left,
then rotate right until you get a strong signal. If the LED light
flashes amber or red, the signal is too strong and could result
in poor sound quality. In this case, reduce the level
or move farther from the sound source.
USING RASPBERRY WITH
A MICROPHONE STAND
Simply unscrew the integrated desktop stand, and screw on
the provided adapter. Then screw Raspberry directly onto your
microphone stand. You can also use the Blue Radius II shockmount
to further isolate Raspberry from bumps and vibrations
SYSTEM REQUIREMENTS
WINDOWS
Windows 7, 8 or 10
USB 2.0 (or better)
64 MB RAM (or better)
For best performance, plug Raspberry directly into your
computer’s USB port. Avoid using a USB hub.
MACINTOSH
Mac OSX (10.7.5 or newer)
USB 2.0 (or newer)
64 MB RAM (or better)