Blue-White F-461 Instruction Manual Download Page 4

URL:

      www.Blue-White.com

E-mail:

   [email protected]

    [email protected] 

Phone:

   714-893-8529

Fax:

 

 714-894-0149

BLUE-WHITE INDUSTRIES

LIMITED WARRANTY

FLOWMETERS  

are warranted to be free of defects in material and workmanship 

for up to 12 months from the date of factory shipment. Warranty coverage is limited to 
repair or replacement of the defective flowmeter only. Blue-White Industries does not 
assume responsibility for any other damage that may occur. 

This warranty does not cover damage to the flowmeter that results from misuse or 
alterations, nor damage that occurs as a result of: meter misalignment, improper 
installation, over tightening, use of non- recommended chemicals, use of non-
reccomended adhesives or pipe dopes, excessive heat or pressure, or allowing the 
meter to support the weight of related piping. Flowmeters are tested and calibrated 
with water only. Although meters may be suitable for other chemicals, Blue-White 
cannot guarantee their suitability. 

Flowmeters are repaired at the factory only. Call or write the factory to receive a 
Return Authorization Number, carefully pack the flowmeter to be returned, including a 
brief description of the problem. Note the RA number on the outside of the carton. 
      
Prepay all shipping costs. The factory does not accept COD Shipments. Damage that 
occurs during shipping is the responsibility of the sender.

Industries, Ltd.

Blue-White

Industries, Ltd.

®

80000-612                                                                                 REV.09 08132020

ISO 9001:2015 

CERTIFIED

USA

MADE IN THE

We are not satisfied

 until you are!

Summary of Contents for F-461

Page 1: ...ries In Line Flowmeter This flowmeter was designed to be easily installed Please read this Instruction guideline before installing your flowmeter Do not install the meter in direct sunlight The meter can be damaged by UV light Building Reliable Products that Enhance the Quality of Life ...

Page 2: ...ll damage the polysulfone meter body and fittings Or install the flowmeter after all glued fittings have dried and fumes have been purged from the system 3 Mounts and supports must be sturdy enough to support the plumbing and prevent vibration Vibration and heavy loads will damage the meter 4 Avoid imposing a sudden burst of flow to the meter Solenoid valves will damage the meter Such a burst will...

Page 3: ...emicals Blue White cannot guarantee their suitability It is the responsibility of the user to determine the suitability of the flowmeter in their application Flowmeters are tested and calibrated for water only MAINTENANCE The Exploded View drawing illustrates assembly of the F 461 series meter If your flowmeter needs to be cleaned refer to this drawing when reassembling the unit The tapered tube m...

Page 4: ...se of non recommended chemicals use of non reccomended adhesives or pipe dopes excessive heat or pressure or allowing the meter to support the weight of related piping Flowmeters are tested and calibrated with water only Although meters may be suitable for other chemicals Blue White cannot guarantee their suitability Flowmeters are repaired at the factory only Call or write the factory to receive ...

Reviews: