Blue Sound VAULT 2, Owner'S Manual

Page: 4 / 19

WARNING!
Steps to Factory Reset:
1. Disconnect the player from electrical power.
2. Wait 10 seconds
3. Reconnect the power
4.
ź U–ˆź2źØ˜¥¥źèsÖź¥Îˆźŭź²¬ˆźÞ²ÎźÃˆˆź˜ÉźÉο¬źLˆ„ŘźÉ²Î–źs¬„ź–²¥„źÉ–ˆź2ź8ÎɈź&²¬ź
(It will immediately turn Green and then back to Red) - do not let go of the LED.
5. Once the LED turns back to Red, continue to hold the button for 30 seconds.
6.
ź ‘Ɉ¿źņŃźÃˆ²¬„Ãؼɖˆź2źØ˜¥¥ź~ˆ’˜¬źÉ²ź~¥˜¬£ź¿ˆ„źŭźÉ–ˆ¬ź¿ˆ¥ˆsÈźÉ–ˆź~ÎÉɲ¬ŝ
All customization to the Bluesound player will be removed and restored to factory settings.
IMPORTANT:
źLˆ«²×˜¬’źÞ²Î¿źç¬’ˆ¿ź‘¿²«źÉ–ˆź2źsÉźs¬ÞźÉ˜«ˆź~ˆ‘²¿ˆźÉ–ˆź2ź~ˆ’˜¬Ãźès֘¬’ź¿ˆ„źØ˜¥¥źs¬ˆ¥źÉ–ˆź
factory reset and leave the player in Upgrade Mode. Just start the steps again to factory reset the player.
You will know the factory reset is successful if the player returns to Hotspot mode (wireless connection - the
LED will turn solid green). If the player is connected to your network through a wired Ethernet connection, it will
simply connect as if it was a new player (LED will turn solid blue).
THIS IS A FACTORY RESET OF YOUR PLAYER. ALL CUSTOMIZATION INCLUDING WI-FI NETWORK
CONFIGURATION, FILE SHARES AND SAVED PLAYLISTS WILL BE LOST. YOU WILL HAVE TO RE-CREATE
THESE ONCE COMPLETE. THIS PROCESS IS ONLY RECOMMENDED IF YOUR PLAYER IS NOT FUNCTIONING
AND AN INTERNET FIRMWARE UPGRADE HAS FAILED. FOR ANY QUESTIONS OR CONCERNS CONTACT
AN AUTHORIZED BLUESOUND CUSTOMER REPRESENTATIVE BEFORE PROCEEDING!
VAULT 2