BLUE SKY SSBB-3222, Owner'S Manual

Page: 7 / 10

7
ASSEMBLY
TOOLS REQUIRED
Socket or wrench for tightening nuts
STEP 1
Unfold the hinged walls so that they
make a square.
STEP 2
Align the holes in each of the three
hinges with the holes in the opposite
wall.
For each hinge, insert one bolt
through the center holes from the
exterior. Tighten each with a small nut.
STEP 3
WARNING: Sharp edges! Use safety
gloves when bending the grill.
Using a flat surface with an edge,
forcefully bend the center of the grill
to a 90° angle. Then bend the two
ends to a 90° angle in the opposite
direction.