7
ASSEMBLY
TOOLS REQUIRED: PHILLIPS SCREWDRIVER, PLIERS
NOTE: TO ENSURE AN EASIER ASSEMBLY, WE STRONGLY ADVISE
ONLY FINGER TIGHTENING BOLTS DURING INITIAL ASSEMBLY. ONCE
ALL BOLTS ARE INSERTED, FULLY TIGHTEN ALL BOLTS. DO NOT
OVERTIGHTEN.
NOTE: BOLTS SHOULD BE INSERTED THROUGH WASHERS AND
THROUGH THE INSIDE OF THE FIRE PIT, THEN SECURED WITH NUTS
ON THE OUTSIDE.
STEP 1
NOTE: It is easier to assemble the legs
with the legs open.
Attach the three legs [G] to the fire
bowl [F] using two bolts [J], washers
[K] and nuts [L] per leg. Insert each
bolt through a washer, then through
the fire bowl and leg. Secure on the
outside with a nut.
STEP 2
Place the grate [E] in the fire bowl [F].
G
F
E
F
K
L
J
