8 | www.blueskyoutdoorliving.com
ASSEMBLY
NOTE: USE TWO PEOPLE TO LIFT AND TURN THE FIRE BARREL.
NOTE: WE STRONGLY ADVISE ONLY FINGER TIGHTENING BOLTS
DURING INITIAL ASSEMBLY. ONCE ALL BOLTS ARE INSERTED, FULLY
TIGHTEN ALL BOLTS. DO NOT OVERTIGHTEN.
STEP 1
Insert the ash catch connector [M]
through the ash catch [H] and into the
bottom of the fire bowl [D]. Secure the
ash catch connector with two nuts [Q],
one on either end of the connector.
STEP 2
Turn the fire bowl upside down
and place on soft surface to protect
the finish. You may require two people
to lift the fire bowl.
Slip one leg [G] into a bracket on the
bottom of the fire bowl [D] and secure
with two M6 x 10 mm bolts [N].
Repeat to attach the other two legs.
Securely tighten all bolts, then turn the
fire bowl upright.
H
M
Q
Q
D
G
N
D
