16 | www.blueskyoutdoorliving.com
STEP 8
WARNING
Remove the protective film
before assembling.
Secure all fastening hardware loosely
and tighten when reflector assembly is
properly aligned.
Slide two reflector panels [A] together.
Insert one M6 x 10 screw [II] into the
reflector panels. Slide one 6 mm washer
[HH] over the threaded end of the
screw, then screw on one cap nut [JJ].
STEP 9
Put the reflector plate [B] in the center
of reflector panels.
Slide in the third reflector panel [A].
Insert one M6 x 10 screw [II] into each
reflector panel. Slide a 6 mm washer
[HH] over the threaded end of each
screw, then loosely screw on a cap
nut [JJ].
Attach the reflector plate to the three
reflector panels using six M6 x 10
screws [II], 6 mm washers [HH] and
cap nuts [JJ]
Fully tighten all screws.
A
B
JJ
HH
II
A
JJ
JJ
JJ
HH
HH
HH
II
II
II
Summary of Contents for PHG8732SS
Page 59: ...59 ...
