Any operation. Any asset. Anywhere. SkyLink Installation Guide v1.10
Page
24
of
29
© 2021 Blue Sky Network, All Rights Reserved
Step 3
– Attach Power
Depending on your purchase, your kit will include one of the following power adapters:
•
12V Cigarette Lighter
•
12V DC Power Supply with Ignition Sense
•
POE Injector
•
AC/DC Power Adapter
NOTE
: Some adapters, such as the POE Injector, may require connection to an additional cable that will
be included in your kit. Please see the question,
“My kit came with a POE power source. What is it and
how do I use it?”
in the FAQ section of the SkyLink User Guide if you need further assistance.
To power on the device, remove the connector cap from the power port located on the bottom panel of
the unit. Connect the power cable into the port and the adapter into the appropriate power source (e.g., a
wall or vehicle outlet).
Confirm Unit Status
To confirm the status of the unit, use the power LED indicator located on the top panel of the device. It
will show green, followed by red, then flashing blue as it boots. A steady blue LED indicates that the unit
is ready to use.
Power Off Unit
When you want to turn the unit off, simply unplug the power adapter from the power port located on the
bottom panel. The power LED indicator will show green and slowly fade. Once the indicator is completely
dark (approximately 60 seconds), the unit has turned off.
