background image

Blue Sky Network, LLC 

 

February 2018 

HE100A Install Guide 

19 

Version 1.5 

through to the Purchaser. The Purchaser must deal directly with, and Blue Sky accepts no responsibility 
regarding the actions of, the manufacturer of the antenna. 

Blue Sky does not warrant any installation, maintenance, or service of this Product or any component 
thereof not performed by Blue Sky. 

Blue Sky is not responsible in any way for any damage to ancillary equipment or software which is 
attached to or used in connection with this Product, or for operation of this Product with any ancillary 
equipment or software, and all such equipment and software are expressly excluded from this warranty. 
Furthermore, Blue Sky is not responsible for any damage to this Product.  

BLUE SKY ASSUMES NO RESPONSIBILITY FOR PAYMENT OF ANY REPAIR SERVICES 
PERFORMED BY THIRD PARTIES INCLUDING REMOVAL OF THE UNIT FROM THE AIRCRAFT, 
INSPECTION, PACKAGING, HANDLING, OR INSTALLATION UNLESS SUCH SERVICES ARE 
AUTHORIZED IN ADVANCE AND IN WRITING BY BLUE SKY. 

HOW TO GET WARRANTY SERVICE 

Warranty service is available by contacting Blue Sky at the following telephone number (during business 
hours) or email address or by returning the Warranted Components to Blue Sky at the following address: 

Blue Sky Network, LLC. 
5333 Mission Center Rd. #220 
San Diego, CA 92108, USA 
Phone: +1-858-551-3894 
E-mail: [email protected] 

Purchasers are advised to contact Blue Sky at the above telephone number or email address for a 
consultation prior to returning Warranted Components. All Product shipped to Blue Sky must be shipped 
with freight, duties, and insurance prepaid. Purchaser must include with the Product a bill of sale (or other 
comparable proof of purchase), the Purchaser’s name, address and telephone number, the tail number 
and serial number of the aircraft on which the Product was installed and a detailed description of the 
problem. Warranted Components that are repaired or replaced under this limited warranty shall be 
shipped to Purchaser at Blue Sky’s expense for the freight and insurance and at Purchaser’s expense for 
any applicable duties or other expenses of shipment. 

Blue Sky reserves the right to make changes, upgrades, and improvements to this product without 
incurring any obligation to install such changes, upgrades, and improvements in previously manufactured 
products. 

ANY SERVICE WORK PERFORMED BY A PARTY OTHER THAN BLUE SKY OR BY A PARTY NOT 
OTHERWISE AUTHORIZED BY BLUE SKY SHALL IMMEDIATELY VOID THIS LIMITED WARRANTY. 

Please contact Blue Sky Network, LLC if you have any questions regarding Blue Sky’s limited warranty. 

DISCLAIMERS & LIMITATION OF LIABILITY 

EXCEPT FOR THE LIMITED WARRANTY SPECIFICALLY PROVIDED HEREIN, ALL OTHER 
WARRANTIES ARE EXPRESSLY DISCLAIMED, INCLUDING, WITHOUT LIMITATION, WARRANTIES 
OF MERCHANTABILITY AND FITNESS OR SUITABILITY FOR A PARTICULAR PURPOSE. ANY 

Summary of Contents for 300100






















Reviews: