-31-
Revision 5/F3534
©
Moffat Ltd, April 2005
Turbofan Convection Oven
Two Screws
6.3.10 HOLD THERMOSTAT
8) Re-assemble in reverse order.
Figure 6.3.12
1) Open control panel (refer 6.2.1) and undo two
screws securing hold thermostat bracket.
2) Transfer wires to new thermostat.
3) Remove service panel (refer 6.2.2) and from
inside of oven loosen the thermostat phial
bracket.
4) Withdraw old thermostat phial through rear of
oven.
5) Insert new thermostat.
6) Re-assemble in reverse order.
Two
Screws
Figure 6.3.14
Figure 6.3.13
6.3.12 MINI-CONTACTOR (TO S/N 232053)
1) Open control panel (refer 6.2.1) and transfer
wires from old mini-contactor to new
contactor.
2) Remove two screws securing old mini-
contactor to control panel.
Figure 6.3.16
3) Secure new mini-contactor to control panel
using two screws.
Two Screws
6.3.11 HOLD RELAY (FROM S/N 232054)
1)
Open control panel (refer 6.2.1) and
transfer wires from old hold relay to new
relay.
2) Remove two screws securing the old hold
relay to control panel.
Figure 6.3.15
3) Secure new hold relay to the control panel
using two screws.
Hold Relay
Fibreglass Sleeve
Thermostat Phial
5) Withdraw old thermostat phial through rear of
oven.
6) Remove fibreglass sleeve from old thermostat
and fit it to replacement thermostat.
7) Insert new thermostat.
