Page 5
Model#
CPSV003541
Page 5
1.888.753.7137
Page 6
To complete assembly you will need:
• 1 precision-filled standard grill LP gas tank (20#)
with external valve threads
• 4 oz. leak check solution - mix 1 part dishwashing
soap with 3 parts water
1. Attach Post to Cart
• Slide post into base of cart
• Attach with bolt, washer and knob as shown
• Hand tighten securely
2. Attach Handle to Post
• Position handle on post
• Attach with bolts, washers and knobs as shown
• Hand tighten securely
3. Install Igniter Battery
• Open battery compartment by turning cap on
bottom of engine counter clockwise
• Place the supplied AA battery into compartment
– negative (-) end goes in first
• Secure cap by turning clockwise until it stops
4. Attach Engine to Post
• Place engine onto post
• Press down until the snaps engage
• Slide WaveTrap
™
into engine
• Position FineTune
™
ring and lure in place
• Place rain cover on engine and twist clockwise to
secure
5. Install LP gas tank
• Use only DOT approved 20# tanks with collar fully
intact
• Place full LP gas tank upright on cart so system is
arranged for vapor withdrawal
• Secure tank by attaching tank retention chain
• Connect gas line to tank by turning knob clockwise
until it stops
• Turn tank ON and test for leaks
• Spoon leak check solution at all “x” locations
• If any bubbles appear turn tank OFF, reconnect
and re-test
• If no bubbles appear after one minute turn tank
OFF, wipe away solution and proceed
• Place cover over tank
Quick & Easy Assembly
Tip
: to locate a retailer in your neighborhood
that provides precision-filled tanks,
visit
www.bluerhino.com
or call toll free
1.800.258.7466.
X
X
X
X
X