24
Cleaning Instructions for Burner, Pilot Assembly, and Emitter Screen • Series: 220000-450000
For assistance call: 1.800.762.1142
Step 27 – 28
27. To reassemble, follow these instructions in reverse and reassemble all parts to the heater in order.
28. Install LP gas tank per “Installing LP Gas Tank” instructions in owner’s manual.
29. Connect LP gas tank per “Connect LP Gas Tank” instructions in owner’s manual.
DANGER
If you smell gas -
1. Shut off gas to appliance.
2. Extinguish any open flame.
3. Open lid.
4. If odor continues, keep away from the appliance and
immediately call your gas supplier or your fire department.
WARNING
FOR YOUR SAFETY:
You must follow all leak-checking procedures before operating. To prevent
fire or explosion hazard when testing for a leak:
a. Always perform leak test before lighting the heater and each time the
tank is connected for use.
b. No smoking. Do not use or permit sources of ignition in the area while
conducting a leak test.
c. Conduct the leak test outdoors in a well-ventilated area.
d. Do not use matches, lighters, or a flame to check for leaks.
e. Do not use heater until any and all leaks are corrected.
If you are unable to stop a leak, disconnect the LP gas supply. Call a
gas appliance serviceman or your local LP gas supplier.