Page 114 of 195
AT.s LE Command Set v5.1.1b
Copyright © 2002-2021 BlueRadios, Inc.
200 S. Wilcox St., Unit 158 • Castle Rock, CO 80104 • USA • 303-957-1003 •
Connect Configuration (ATSDMLE)
SET CONNECT CONFIGURATION
Function:
Sets the connection command parameters.
Command Format:
ATSDMLE,<Channel_Map>,<BRSP_On_Connect>
Command Parameter(s):
▪
Channel_Map:
1 = 37
2 = 38
3 = 37,38
4 = 39
5 = 37,39
6 = 38,39
7 = 37,38,39
▪
BRSP_On_Connect:
Integer value from 1 to 65535 [s]. A value of 0 can be used to disable the timeout.
0 = No BRSP On Connect
– The module will stay in command mode upon connecting.
1 = BRSP Data Mode
– The module will go into BRSP data mode upon connecting.
2 = BRSP Remote Command Mode
– The module will go into BRSP remote command mode
upon connecting.
Example(s):
COMMAND:
ATSDMLE,7,1
<cr>
RESPONSE:
<cr_lf>
OK
<cr_lf>
Note(s):
▪
This command cannot be used when the module is in the Connecting State.
GET CONNECT CONFIGURATION LE
Function:
Gets the connection initiation timing parameters.
Command Format:
ATSDMLE?
Response Format:
<Channel_Map>,<BRSP_On_Connect>
Example(s):
COMMAND:
ATSDMLE?
<cr>
RESPONSE:
<cr_lf>
OK
<cr_lf>
<cr_lf>
7,1
<cr_lf>
