Blue Rabbit 2.0 Deckswing, Assembly Instructions Manual, Page: 5 / 40

5
3
TX20
3
28
5
10
13
TX
30
TX 20 TX 40
(1) (2) (3)
(8)
(11)
(8)
(4)
(5)
(9) (9)
(10) (10)
(6) (7)
TOOLS REQUIRED
(1) ratchet spanner with cap 13
(2) tape measure
(3) pencil
(4)
drill and/or screwdriver
(5) square
(6) wood saw
(7) hammer
(8) bit torx TX20 and TX40
(9) wood bore bits Ø 3 mm and Ø 5 mm
(10) speed bore bits Ø 10 mm and Ø 28 mm
(11) bit torx TX30
EN ASSEMBLY INSTRUCTIONS
WOOD SCREWS
ƐƚĞƉϭͬdŽƉƌĞǀĞŶƚƚŚĞǁŽŽĚƐƉůŝƫŶŐǁĞƌĞĐŽŵŵĞŶĚƉƌĞͲĚƌŝůůŝŶŐĂůůǁŽŽĚƚŽďĞ
ƐĐƌĞǁĞĚ͘ůǁĂLJƐĚƌŝůůĂƚůĞĂƐƚϭϱŵŵůĞƐƐĚĞĞƉƚŚĂŶƚŚĞůĞŶŐƚŚŽĨƚŚĞƐĐƌĞǁ͘
WƌĞͲĚƌŝůůǁŽŽĚƐĐƌĞǁƐǁŝƚŚĂĚŝĂŵĞƚĞƌŽĨϰ͘ϱŵŵǁŝƚŚĂϯŵŵǁŽŽĚďŽƌĞďŝƚ͘
ƐƚĞƉϮͬ&ŝƌƐƚƚƵƌŶƚŚĞƐĐƌĞǁŽŶĞŽƌƚǁŽŵŝůůŝŵĞƚƌĞƐŝŶƚŽƚŚĞƉůĂŶŬƚŽďĞƐĞĐƵƌĞĚ͕
ƚŚĞŶƉƌĞƐƐƚŚŝƐĮƌŵůLJĂŐĂŝŶƐƚƚŚĞŽƚŚĞƌƉŝĞĐĞŽĨǁŽŽĚ͘
ƐƚĞƉϯͬdŝŐŚƚĞŶƚŚĞƐĐƌĞǁǁŝƚŚƚŚĞƚŽƌdždyϮϬďŝƚƐƵƉƉůŝĞĚŝŶƚŚĞǁŽŽĚƵŶƟůƚŚĞ
ŚĞĂĚŽĨƚŚĞƐĐƌĞǁŝƐůĞǀĞůǁŝƚŚƚŚĞƐƵƌĨĂĐĞŽĨƚŚĞǁŽŽĚ͘
COACH SCREWS
ƐƚĞƉϭͬdŽƉƌĞǀĞŶƚƚŚĞǁŽŽĚƐƉůŝƫŶŐǁĞƌĞĐŽŵŵĞŶĚƉƌĞͲĚƌŝůůŝŶŐĂůůǁŽŽĚƚŽďĞ
ƐĐƌĞǁĞĚ͘ůǁĂLJƐĚƌŝůůĂƚůĞĂƐƚϭϱŵŵůĞƐƐĚĞĞƉƚŚĂŶƚŚĞůĞŶŐƚŚŽĨƚŚĞƐĐƌĞǁ͘
WƌĞͲĚƌŝůůĐŽĂĐŚƐĐƌĞǁƐǁŝƚŚĂĚŝĂŵĞƚĞƌŽĨϴŵŵǁŝƚŚĂϱŵŵǁŽŽĚďŽƌĞďŝƚ͘
ƐƚĞƉϮͬWůĂĐĞƚŚĞŇĂƚǁĂƐŚĞƌĂŶĚƚŚĞďŽƩŽŵŽĨƚŚĞƉƌŽƚĞĐƟǀĞĐĂƉŽǀĞƌƚŚĞƐŚĂŌ
ŽĨƚŚĞƐĐƌĞǁ͘
ƐƚĞƉϯͬ&ŝƌƐƚƚƵƌŶƚŚĞƐĐƌĞǁŽŶĞŽƌƚǁŽŵŝůůŝŵĞƚƌĞƐŝŶƚŽƚŚĞďĞĂŵƚŽďĞƐĞĐƵƌĞĚ͕
ƚŚĞŶƉƌĞƐƐƚŚŝƐĮƌŵůLJĂŐĂŝŶƐƚƚŚĞŽƚŚĞƌƉŝĞĐĞŽĨǁŽŽĚ͘
ƐƚĞƉϰͬdŝŐŚƚĞŶƚŚĞƐĐƌĞǁǁŝƚŚƚŚĞƚŽƌdžďŝƚdyϰϬƐƵƉƉůŝĞĚ͘
ƐƚĞƉϱͬWƌĞƐƐƚŚĞƚŽƉŽĨƚŚĞƉƌŽƚĞĐƟǀĞĐĂƉŝŶƚŽƚŚĞŽƉĞŶŝŶŐƉƌŽǀŝĚĞĚ͘
BOLTED CONNECTIONS
step 1/ Drill a hole with diameter 10 mm through both planks or beams that have
already been screwed together (see ‘wood screws’)
step 2/ Hit the drive-in nut with a hammer along the designated side of the beam
in the hole.
ƐƚĞƉ ϯͬ WůĂĐĞ ƚŚĞ ƐƉƌŝŶŐ ƌŝŶŐ͕ ƚŚĞ ŇĂƚ ǁĂƐŚĞƌ ĂŶĚ ƚŚĞŶ ƚŚĞ ďŽƩŽŵ ƉĂƌƚ ŽĨ ƚŚĞ
ƉƌŽƚĞĐƟǀĞĐĂƉŽǀĞƌƚŚĞƐŚĂŌŽĨƚŚĞďŽůƚ͘
ƐƚĞƉϰͬWƵƐŚƚŚĞďŽůƚƚŚƌŽƵŐŚƚŚĞŚŽůĞ͕ĂŶĚƚƵƌŶďLJŚĂŶĚƐĞǀĞƌĂůƟŵĞƐƵŶƟůƚŚĞ
bolt turns smoothly in the press-in nut.
ƐƚĞƉϱͬdŝŐŚƚĞŶƚŚĞďŽůƚǁŝƚŚƚŽƌdžďŝƚdyϰϬƐƵƉƉůŝĞĚ͕ƵŶƟůƚŚĞƐƉƌŝŶŐƌŝŶŐŝƐĨƵůůLJ
ŇĂƩĞŶĞĚďĞƚǁĞĞŶƚŚĞŚĞĂĚŽĨƚŚĞďŽůƚĂŶĚƚŚĞŇĂƚǁĂƐŚĞƌ͘
ƐƚĞƉϲͬWƌĞƐƐƚŚĞƚŽƉŽĨƚŚĞƉƌŽƚĞĐƟǀĞĐĂƉŝŶƚŽƚŚĞŽƉĞŶŝŶŐƉƌŽǀŝĚĞĚ͘
5
TX
40
10
TX 40