4. Using 10MM socket, remove one metric bolt
just forward of the front tire on bottom side of
fascia. Using a fl at screwdriver, turn the screw
pin (grey arrow) 90
o
and the screw will pop
out. Do this to both sides of vehicle. Set bolts
and pins aside to be reinstalled later.
2008-09 Toyota Scion XB
(No Foglights)
Installation Instructions
BX3776
6. Using a 10MM socket, remove two bolts from
the right side of the washer reservoir. Set bolts
aside for later reinstallation.
Page 4 of 8
292-2984
3/2/09
5. Remove eight metric bolts from lower edge
of fascia all the way around using a 10MM
socket. Pull fascia corners out to the side
of the vehicle on both sides, then forward.
Set aside fascia and bolts aside for later
reinstallation.
7. Using a 10MM socket, remove metric bolt from
the top of the washer reservoir. Disconnect
wires and hoses. Set aside bolt for later
reinstallation.
Ô
Ô
Ô Ô
4
4
Ô Ô
6
6
Ô Ô
7
7
8. Using a 10MM socket, remove the bolt from
between wheel well cover and left side of
washer reservoir. Disconnect all electrical and
fl uid lines, then remove reservoir and bolt. Set
aside for later reinstallation.
8
8
Ô
Ô
Ô Ô
Ô Ô
Ô Ô
5
5
Ô
Ô
Ô
Ô
Ô Ô
