© 2005, 07, 08, 09, 10
Blue Ox Division, Automatic Equipment Mfg. Co. • One Mill Road, Industrial
Park
TM
Page 2 of 3
292-2666 Rev. H
3/15/10
8.
Reinstall plastic air dam and cross member.
9.
The dimensional variations between otherwise identical cars can be considerable. While the baseplate
was designed for easy installation, it may be necessary to tailor the baseplate slightly to compensate
for auto manufacturers' tolerances. These minor adjustments may include filing a hole slightly, bending
electrical rods, adding shims and/ or bending endplates.
10.
Install the tow bar and safety cables according to the instructions included in their packages.
11.
Do
not
substitute other devices if the tow bar pin and clip are lost.
7.
Insert 1/2"-13 x 1-3/4" bolts into the face of
the baseplate and install 1/2" lock washers
and 1/2"-13 hex nuts on the back side of
metal bumper. Install the remaining two (2)
1/2"-13 x 1-3/4" bolts with 1/2" lock washers
into the existing tow hook holes on the
bottom side. Do this on both sides of the
vehicle. Tighten all hardware.
Be sure and
use loctite on all bolts before tightening.
2005 F-350
