© 2003, 05
Blue Ox Division, Automatic Equipment Mfg. Co. • One Mill Road, Industrial Park
Pender, Nebraska 68047 • Phone 402-385-3051 • Fax 402-385-3360 • www.blueox.us
TM
Page 2 of 4
292-2550
7/16/08
9.
Remove three metric bolts from washer
reservoir on passenger's side, using the 10MM
socket. Lift reservoir up to release alignment
pin from top of frame, unplug electrical
connections, disconnect and plug water lines.
10.
Using the hack saw, cut alignment pin from the
bottom of reservoir tank.
11.
Bend brackets up on both sides to open area
for baseplate insertion.
7.
Using the 12MM socket, remove two metric
bolts from the front of the belly pan, loosen
the two back metric bolts and set aside.
8.
Remove four push pins from bottom edge of
front fascia, just under belly pan and two just
forward of front tires on the bottom edge of
fascia, both sides.
12.
Drill one hole in frame on the outer
side next to sensor, using the 1 1/4"
hole saw, both sides.
