BX1141
2019-2020 Jeep Cherokee Aluminium Bumper w/out Tow Hooks
(Includes Adaptive Cruise Control) (2-Speed Transfer Case)
Installation Instructions
405-0645 Rev D
Page 7 of 8
9/5/19
11. Install the electrical mounting bracket to
either side convenience link using two (2)
5/16” bolts (white) with nylon lock nuts.
Optional
: Attach breakaway switch to the
electrical mounting bracket using one (1)
1/4” bolt and nut (gray).
12a.
Non Shutter Models:
Using a 7MM
socket, remove the two (2) bolts (white)
from the air dam on the back side of the
fascia. Unclip the three (3) clips (gray) by
pushing down on the inside of the clip.
Remove the air dam. Do this on both
sides of the vehicle.
13. Remove the horizontal slats from the
corner of the fascia as shown. Do this on
both sides of the vehicle.
12b.
Shutter Models:
The plastic surrounding
the outer grille areas must be trimmed
to expose the grill behind. Follow the
protrusion straight down leaving the areas
next to the screws intact. Do this on both
sides of the fascia.
** Use Loctite
®
Red on all bolt threads and tighten
all bolts to the appropriate torque.**
