BX1133
2012 Jeep Wrangler Unlimited Call of Duty
Installation Instructions
405-00281
Page 2 of 5
8/3112
The dimensional variations between otherwise identical vehicles can be considerable. While the
baseplate was designed for easy installation, it may be necessary to tailor the baseplate slightly to
compensate for vehicle manufacturer’s tolerances. These minor adjustments may include filing a hole
slightly, bending electrical rods or bending end plates.
The BX8869 Tail Light Wiring Kit is recommended for this vehicle.
NOTICE
• Handling of some cosmetic parts when installing this product may require the use of protective
covers, rags, specialty tools, etc. to prevent damage.
• When using power drills be aware of the dangers of torque and drill bit length.
• Be sure that
ALL
electrical connections are plugged in properly and functioning before
reinstalling the fascia
.
• Do not use the towed vehicle for storing luggage, equipment, etc. This may cause you to
exceed the towing capacity of the tow bar, baseplate and its accessories.
• Be sure to use Loctite
®
Red on all bolts before tightening. Tighten all bolts according to the
torque chart provided.
Drill a 1” hole to install the 3 wire
automotive socket.
